DRYDOCKING & SHIP REPAIR

Drydocking · Survey & Repair · Refit Engineering

From docking planning, hull and propulsion systems, main engines and generators, steering gear, piping and valves and electrical works, through to class survey support and completion sea trials — YOZE coordinates every trade through a single point of contact.

20+ Years

Hands-on Marine Engineering Experience

BV · CR

Dual-class survey coordination

ISO

9001 · 14001 · 45001

Single Point of Contact

Turnkey Project Management

Core Engineering Capabilities

Eight core capabilities covering the full drydocking scope — from hull and propulsion systems through to class survey and sea trials.

Underwater hull and propeller inspection in dock
Hull & Structural Works

Docking coordination, bottom survey, de-rusting, coating, steel repair and underwater hull works.

Vessel bow in drydock
Piping & Valves

Sea chest and suction / discharge valve lapping, pipe surveying and prefabrication, hydrostatic and air-tightness testing.

Marine main engine overhaul and servicing
Main Engines & Generators

Servicing, overhaul, consumable renewal and fault diagnosis of marine main engines and generators, including Scania units.

Marine steel structure welding
Steel Fabrication & Welding

Structural welding repair, pipework modification, equipment seatings, and fabrication or repair of marine steel structures.

Propeller and rudder close-up — propulsion system overhaul
Shafting · Propeller · CPP

Tailshaft withdrawal survey, propeller removal and refitting, shaft seals and liners, plus overhaul and adjustment of controllable pitch propeller (CPP) systems.

Main engine control and diagnostic system testing
Electrical & Navigation Equipment

Power distribution and insulation testing, terminal maintenance, and installation and integration of navigation and communication equipment.

Steering gear inspection and adjustment
Rudder & Steering Gear

Inspection, dismantling, refitting, adjustment and function testing of the rudder system, steering gear and control linkage.

Dock gate operation during vessel docking
Class Survey & Sea Trials

BV / CR survey attendance, hold point management, completion testing and sea trial measurement.

Completion alone is not enough — it must be safe and within the dock window

Single Point of Contact

Multiple trades, external work packages and class survey interfaces brought together under a single point of contact.

Experienced Site Team

The team brings over 20 years of hands-on marine and engine-room experience and knows the rhythm of ship repair and drydocking work.

Rapid Mobilisation · Local Supply Chain

Local Taiwanese suppliers, materials, machining and logistics are mobilised for urgent or non-standard work.

Quality & Safety Systems

ISO 9001 / 14001 / 45001 management systems underpin our quality, environmental and occupational health and safety practice.

ISO 9001 · 14001 · 45001 Certified Management Systems

Quality, environmental and occupational health and safety management systems, certified by InterCert.

ISO 9001:2015 Quality Management System certificate — YOZE Marine
ISO 9001:2015 Quality Management System certificate — YOZE Marine
ISO 14001:2015 Environmental Management System certificate — YOZE Marine
ISO 14001:2015 Environmental Management System certificate — YOZE Marine
ISO 45001:2018 Occupational Health & Safety Management System certificate — YOZE Marine
ISO 45001:2018 Occupational Health & Safety Management System certificate — YOZE Marine

Drydocking Workflow

From scope confirmation to completion sea trial, every stage has defined deliverables and class hold points.

01
Scope Confirmation
Work items and applicable rules confirmed
02
Docking Window Planning
Trades, materials and hold points planned
03
Docking & Initial Inspection
Blocking and initial inspection
04
Repair & Overhaul
Dismantling, machining and renewal
BV / CR attendance
05
Class Survey & QA
Hold points signed off item by item
BV / CR attendance
06
System Testing
Reinstatement and function testing
07
Sea Trial & Handover
Sea trial and vibration spectrum measurement
BV / CR attendance
BV / CR attendance= stages attended in full with the class surveyor and signed off item by item

MEASUREMENT & SEA TRIAL

We hand back more than the vessel — we hand back the data

Critical operations are not signed off on experience alone. CPP pitch travel, shaft alignment and sea trial vibration readings are recorded and handed over with the completion documentation to the owner and the class society.

Controllable pitch propeller (CPP) test record — ahead and astern pitch travel and control signal testing

CPP System Test Record

Controllable pitch propeller (CPP) pitch travel is tested step by step, ahead and astern, with the control signal compared against the actual pitch position and the results recorded.

Shaft clutch and alignment measurement jig

Shaft Alignment Measurement

Clutch-to-shaft concentricity is verified with a jig; after refitting, every item is re-measured and recorded.

BV / CRHold points signed off item by itemSea TrialVibration spectrum measurementHandoverCompletion documentation and survey reports

Project References

Real drydocking and marine engineering projects that show our technical depth. Client and vessel names are withheld under confidentiality agreements.

Hull coating, before — marine growth and corrosion
Hull coating — before
Hull coating, after — antifouling coating completed
Hull coating — after
Offshore wind Safeway system removal — after completion
Offshore Wind Safeway System Removal (DEMOB)

Removal of an offshore wind Safeway system and reinstatement of the deck.

160-Tonne Generator Heavy Transport & Lifting
160-Tonne Generator Heavy Transport & Lifting

Heavy Transport

Port authority vessel — hawse pipe weld repair
Port Authority Vessel · Hawse Pipe Weld Repair

Hull steel welding repair, with urgent and routine spare parts procurement.

Site Work Records

From dock-wide views and deck operations to component close-ups — real scenes from drydocking, steelwork, engine room and marine engineering projects.

Bow-on view in dock, anchor cable ranged on the dock floor for inspection
Offshore wind project — deck support steelwork installation and securing
Marine main engine overhaul and servicing
Arrival survey — hull coating breakdown and marine growth
Deck steelwork welding
Shaft withdrawal survey
Vessel slipway haul-out and transfer
Hull side steelwork and coating
Steering gear overhaul
Workboat on blocks for underwater hull survey
Antifouling coating completed on the hull bottom
Steering gear adjustment
OFFSHORE WIND SUPPORT

Offshore Wind Engineering Support

Marine engineering support from mobilisation through to demobilisation — YOZE provides MOB / DEMOB, sea-fastening, steelwork and welding, deck modification, equipment installation, lifting and logistics manpower coordination for offshore wind projects.

  • MOB / DEMOB
  • Sea-fastening & Grillage
  • Steel Fabrication & Welding
  • Deck Modification
  • Equipment Installation
  • Heavy Lift & Logistics
  • Site Manpower Support

Integrated Project Management · Single Point of Contact

Owners deal with one point of contact. YOZE schedules, supervises and signs off all eight work packages, avoiding the interface gaps and delays that come with awarding them separately.

Steelwork · Fitting

Structural welding repair, pipework modification, seating repair, railing and handrail refurbishment

Electrical · Power Distribution

Megger insulation testing, switchboard terminal servicing, AVR replacement

Nautical Instruments · Navigation

GPS compass replacement, calibration and navigation signal integration

Shafting · Propulsion

Twin-shaft withdrawal survey, propeller removal and refitting, shaft machining and shaft seal renewal

Ultrasonic Thickness Measurement

Ultrasonic thickness measurement accepted by both BV and CR, with survey reports issued.

Life-Saving & Fire-Fighting Equipment

MOB davit and gangway load testing with survey reports

Radio & GMDSS Communications

Ship-wide GMDSS radio equipment survey and restoration

Class Coordination · Dock Schedule Control

BV / CR survey scheduling, progress control, completion documentation and sea trial

All of these work packages are managed by YOZE, executed to class requirements and the dock schedule, with survey reports and completion documents delivered as one set.

Site Footage

Port works site · open-air hot work (silent loop)

PORT-SIDE & ON-SITE WORKS

Quayside works: no workshop, same standard

Port and quayside work is mostly carried out in the open: dust, harsh sun, gravel ground, no workshop and no fixed lifting gear. We bring the equipment, the crew and the inspection process to the quay, and complete hot work, cutting and steelwork within the owner’s requirements.

Open-Air Hot Work

A temporary shelter blocks wind and contains sparks, controlling the hot work area and the heat-affected zone.

On-Site Safety Management

Work starts only once the fire watch is posted, extinguishers are in place and full PPE is worn.

Self-Mobilised Equipment

Mobile welding, gas cutting and power generation equipment are brought in, with no reliance on site resources.

No Compromise on Standards

Even without a workshop, work still follows the owner’s requirements, hold points and documented procedures.

The tougher the quayside site, the more you need a crew that brings its own equipment, its own fire watch and its own records.

Tell Us About Your Port Project

Planning a drydocking or repair project?

Send us the vessel type, planned dock window, work list or photos of the current condition and we will help scope the work and plan how to execute it.

service@yozemarine.com | +886-916-523-016